A balancing device for crushers, fans, mulchers, augers on combines, shafts, centrifuges, turbines, and many others.
Posted: 09 Mar 2025 21:06
Description:
Order on Etsy
Save €100 on vibromera.eu with promo code VB100!
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Core Features and Capabilities
Vibration Meter Mode
Tachometer: Accurate RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Saves data for later analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Graphs and Diagrams
Overall Graphs: Represents general vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Provides a detailed view of the frequency spectrum for analysis.
Additional Functions
Archive: Save and access past balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Easily repeat the balancing process using saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
What’s in the Package
The Balanset-1A comes with:
A measurement module with interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic base.
Software (laptop not included, available for purchase).
Digital weighing scales.
Protective transport case.
Price:
Full kit: €2251
OEM kit: €1978
Order on Etsy
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu
Order on Etsy
Save €100 on vibromera.eu with promo code VB100!
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Core Features and Capabilities
Vibration Meter Mode
Tachometer: Accurate RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Saves data for later analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Graphs and Diagrams
Overall Graphs: Represents general vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Provides a detailed view of the frequency spectrum for analysis.
Additional Functions
Archive: Save and access past balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Easily repeat the balancing process using saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
What’s in the Package
The Balanset-1A comes with:
A measurement module with interface.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic base.
Software (laptop not included, available for purchase).
Digital weighing scales.
Protective transport case.
Price:
Full kit: €2251
OEM kit: €1978
Order on Etsy
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu